Maintenance: Deck Refinish continued

Im glad my decking is 3/8" thick, I could refinish it many times if need be, but I hope this time it lasts 5 years or so and then only needs a scuff and a couple maintenance coats from now on.
The only issue I have run into is that I sanded a bung down to nothing. I was able to chip what was left of the bung out with my dremel tool then unscrew the screw and resink the hole for the bung and install a new screw and new bung.

Why I am at it I decided I would refinish the dash and carlings as well.

The entire deck was belt sanded with 80 and 120 to get back to bare wood. That took about 7 hours. Scuffing the dash and carlings with 120 on an RO sander took another hour. Im now RO sanding the deck with 120 then 220 before the first epoxy coat goes down.