Keel 2

After a week off from building the boat due to work I am back at it.

Today I drilled the two holes where the keel attaches to the stem at the front of the boat. Both holes came out perfectly straight.

I also epoxied the Keel/Knee/Transom joint at the aft end of the boat. That also came out quite well. If the aft end cures enough before dark tonight then I will epoxy up the keel/stem joint at the front end as well as each frame bottom/keel joint before bed tonight.

June 22nd, longest daylight of the year so I should have time to get to it before dark.