Fairing 3

I didnt get as much done this weekend as I hoped. The hot weather slowed me down quite a bit as well as a couple areas where the sheer fit is not perfect and patching these spots takes time.
Here is one of those spots in the picture below.
What caused this is the sheer notch I cut and installed the sheer into at the transom ended up about 1/8" too deep and left a void that needed filled. I mixed a slurry of epoxy and sanding dust from the sanders dust bag to fill the void. Once this mix cures I can sand it down for a nice flush finish. I have a couple more fixes like this to do before I can get back to fairing.