Thursday, October 01, 2009

Bottom Planking

I picked up the bottom planking on tuesday but had to work all day weds and got started on fitting the planking this morning.

I laid the ply over the battens and marked a line on the under side of the plywood around the edge of the chine and transom leaving about 1/4" of space.

Then I cut about 1/4" outside the line and fit the planking on the bottom of the boat. I stopped here because I need to go into work this afternoon. I also need to re-read the plans/instructions before I start screwing this is place to make sure I am not forgetting anything.

Hit Counters
online coupons