Thursday, July 22, 2010

Clear Coats Begin.

OK, after lots of sanding of the encapsulation coats of epoxy I applied the first coat of the SM1000 clear today on the entire hull.
The deck has a few flaws that will need to be sanded out well before the next coat. The flaws are purely the result of my poor/inexperienced roller use. I tried to go back over a couple areas which just makes things worse. If you spot a flaw just go on and sand it out later.
The sides are nearly flawless and will just need a very light sanding before the next coat.
The interior parts are the ones I am not quite happy with. The side frames inside the boat will need to be sanded down to the epoxy. Just not good enough prep work on my part since its so hard to sand in those tight places.
Hit Counters
online coupons